1. How To Install Dmg File On Ipad
2. How To Install A Dmg File On An Ipad

Dmg files are disk images, which the ipad does not support. She needs to double-click the dm and then copy the book/magazine from the dmg to the mac. Then the question is what format is that file and can the ipad read it. If it's a common format like pdf or epub, it will just work. Sync it with itunes.

This guide tells you all you need to know about installing new versions of iOS, upgrading to them, downgrading, and restoring data. Here's what it contains:

How to safely update iOS on your iPhone or iPad

Make sure your data is safe

Before starting any iOS update make sure your iPhone or iPad data is saved. You have two options: an iTunes or an iCloud backup.

Save your files in a safe place if you make iTunes backups. Make an iTunes backup and a copy of it which you can store on Dropbox or on a different computer, as a 'plan B'. If you don’t know where the iTunes files are located on your computer, check this article.

Once you make a new iCloud backup, deactivate iCloud automatic backups after the backup is performed. This will stop any unwanted backup being made after you update. It’s an important step, as your initial iCloud backup could be overwritten by an incomplete one, or by a backup of the phone in a failed state.

To deactivate automatic iCloud backups, go to Settings → iCloud and click on Backup. You’ll find a switch button. Turn it off and confirm.

Once you’ve performed a backup of your data, you’re ready to perform a safe iOS upgrade. The procedure is simple.

You have two options to update your iPhone or iPad to the latest iOS, from iCloud or using iTunes.

If you use iCloud or over the air (OTA) updates, here’s what to do. From the Settings menu go to General then select Software update. You’ll see an option called 'Download and install'. Click on it to initiate the iOS update procedure. If you have restrictions PIN active on the phone, you’ll be asked to introduce it.

If you decide to use the iTunes method, you should install the latest version of iTunes. Then connect your iPhone or iPad to your computer and select your iOS device. On 'Summary', select Check for update then choose Download and update. Wait until the upgrade procedure is finished. Don’t disconnect your iPhone before the iOS update is finished.

Common reasons for failed iOS updates -- and fixes 👩‍⚕️

An iOS upgrade could fail for a lot of reasons. These are the most common ones and the fixes which should be used to make sure the next update will be a successful one:

1. A network error. If you use the OTA method, this is the most common reason for a failed iOS update. You will receive a message telling you that 'an error occurred downloading iOS'. If you tried to restart the iPhone or you disabled and reactivated the Wi-Fi and you can’t make it work you still have a solution: reset your wireless connection. Go to Settings → General → Reset and choose Reset Network Settings. Check your Wi-Fi connection after resetting.

2. You need more free space on the iPhone. The default message for this error is: 'Insufficient Space For Download'. Sometimes, the reason for a failed iOS upgrade is the amount of free space available on the phone. To solve this problem, allow app deletion, or worst case make an iTunes or iCloud backup then delete some files. If you have backups, you can get your files back anytime, after the update.

3. A power failure or a disconnected cable. This is an unpleasant problem, an harder to fix. You have to check if the iPhone is still working or not. The best solution is to connect it to your computer, then initiate an iTunes restore. After the restoration is complete, you can try once again to update your iPhone to iOS.

How to retrieve your data if the iOS upgrade failed

Sometimes instead of updating to iOS, you’re stuck with a failed update or with an older version and a corrupt backup. Even if an update goes wrong, you can still get data back as long as you use the iPhone Backup Extractor.

Depending on where your data was backed up, we recommend you check out either our guide on iCloud data recovery or on getting data back from iTunes backups.

If you get stuck, please drop us a note on live chat. We'd love to help.

How to install an iOS beta

Important things to know before installing an iOS beta

We strongly recommend that before any iOS update you back up with iTunes or iCloud. In fact, such backups should be done regularly in case you ever need to rely on them. This will cover you if:

• iTunes doesn't want to restore that data
• You don't want all of your data from iCloud or iTunes -- just specific files, or
• You want to access all of your iOS device data offline on your computer

How do you access your data if the above happens? It's simple. Use iPhone Backup Extractor, on Windows or macOS, and access your iTunes or iCloud backup with just a few clicks. Our expert support is always happy to help and share from their knowledge and experience, so if you run into troubles or need help, just reach out to us.

To install a full image of an iOS beta on your iPhone, iPad or iPod, you should use the latest released version of iTunes. If you don't have it installed, you can download it from Apple's website. However, modern versions of iOS can be updated to a beta using an 'over the air' (OTA) backup. OTA updates are faster and easier, and won't require the use of iTunes -- or even a computer.

If you need more help, don't forget that Apple publish a document on using their betas.

How to install iOS 14 beta on your device (also works for iOS 13 - 10 betas)

Through the developer beta

1. On your iOS device, navigate to developer.apple.com in Safari

2. Click 'account' and log with to your Apple developer account credentials

3. Select the 'downloads' section

4. Find the latest iOS beta installation profile, and click to download it

5. Your iPhone will bring up a prompt, asking if you'd like to install a configuration profile: choose to do so

6. On your iPhone, go to Settings → General → Software Update, and tap Download and Install

7. Wait for the install and reboot -- and you're done!

Through the public beta

1. On your iOS device, navigate to beta.apple.com/profile, and tap on 'Download Profile' section to enrol your device

2. Your iPhone will bring up a prompt, asking if you'd like to install a configuration profile: choose to do so

3. On your iPhone, go to Settings → General → Software Update, and tap Download and Install

4. Wait for the install and reboot -- and you're done!

About Apple's iOS beta programs

There are two types of iOS beta versions available: the public beta and the developer beta, available through the Apple Developer Program.

The difference between the public beta and the developer beta is that the latter allows developers to build or update third-party apps for iOS. Hence, this may include access to additional resources, compared to those included in the public beta.

It is not a good idea to run the betas on your primary iOS device, not least as they can lead to data loss and regular crashes, and can be hard to roll back from. At least, without losing your data. Still, that's where we help. 👊

The developer beta starts a few weeks before the public betas, and is updated earlier, and sometimes more frequently.

Both versions include a 'Feedback Assistant' app that captures input from those enrolled in the beta program. The 'Apple Beta Agreement' includes a confidentiality agreement, such that if you are enrolled you cannot talk about the software beyond what Apple themselves makes public. Apple betas should be installed on a device that isn't shared with others, and that is not your primary device. Installing the beta update won't void your hardware warranty.

Every year it gets easier to opt-in to the betas. Happy exploring!

How to install an older iOS beta (iOS 9 or below)

Prior to the changes in iOS 10 that simplified the beta installation process, there were a few additional steps to install betas from older versions of iTunes. Specifically, registration of your device's UDID was required.

To register your UDID and access betas, membership of the Apple Developer Program is required. This has an annual membership cost of $99.

Two ways to find your iPhone's UDID

How to find the UDID using iTunes

1. Connect your iOS device and launch iTunes

2. Select your device

3. On the 'Summary' tab, click on the 'Serial Number' label to reveal the 40 character UDID string

4. Right-click and then choose 'Copy'

How to find the UDID using Xcode

1. Connect your iOS device and launch Xcode on Mac

2. Go to the 'Organizer' and select your device

3. Highlight and copy the UDID string

How to register an iPhone's UDID in Member Centre

1. With the UDID in your clipboard, log in to Apple's Member Center, click on Certificates, Identifiers & Profiles and select Devices

2. Click the + symbol to register

3. Give your iOS device a name and paste your Unique Device Identifier copied from iTunes or Xcode

4. Click continue and confirm your entry to complete the registration process

With that done, go back to the Member Center page and navigate through SDK, iOS and iOS {version} beta. Select your device and start downloading.

That'll leave you with a downloaded .dmg or .zip file to extract. These files contain the .IPSW file you need for installation.

Opening DMG files on Windows

Betas from iOS 7 and earlier were distributed as DMG archives. Windows users can't natively open these, but our app DMG Extractor can do this for you.

How to install an IPSW restore file to your iPhone or iPad

1. Before proceeding, turn off “Find my iPhone” in Settings → iCloud → Find my iPhone

2. Connect your iOS device to your computer

3. Launch iTunes and select your device from the top right corner

4. If your iOS device asks to trust your computer, agree, and enter the code on your device

5. Create an up-to-date iTunes backup to keep your data safe

   We'd recommend locally to iTunes, as it's quicker both to backup and restore

6. From the summary tab, hold down the ⇧ Shift key (on Windows) or ⌥ Option key (on Mac) and click the 'Restore' or 'Check for Update' buttons

7. Select the iOS beta IPSW image and click open to being the installation

8. iTunes will inform you that it will update your iOS device (even if you've selected an older firmware) and will verify this update with Apple; click 'Update'

9. Your device will reboot after completing the installation; a network connection is required to complete the activation

10. 'Slide to upgrade' will appear as your device restarts: unlock, enter the password, activate if necessary, and wait for the install process to finish

That’s it! You should now have successfully updated to the beta version of iOS that you selected.

How to upgrade from iOS beta or gold master to the official release

If you're a developer and you're running a gold master release of iOS from the developer beta program, you'll know that often the gold master is binary-identical with the official release. When this is the case, there's no need to update. Sometimes, however, it's not, and there's not an obvious way to get onto the final release.

The answer calls for the classic backup, upgrade and restore. You'll need to download the Gold Master release of iOS, before following the steps we laid out above on installing an IPSW restore file.

How to downgrade an iPhone or iPad from iOS beta

Restoring to an older version of iOS might mean you will not be able to get the data you gathered while using the newer version of iOS on your device. You will not be able to restore an iOS beta iTunes or iCloud backup to an older iOS version. Also -- if you're a cheeky jailbreak user -- your saved blobs will be lost after downgrade.

Restoring your iTunes or iCloud backup data to your iPhone or iPad is possible for most of backed up files, but it's not trivial. Here's our guide on how you can get some of the most important backup data back to your iOS device.

Important: before downgrading from an iOS beta

How To Install Dmg File On Ipad

It's essential to back up your iOS device to either iCloud or iTunes, so that if something goes wrong you can recover your data. We've said it before, but we cannot say it enough: make sure you back up your device before you start the following steps.

You should use the latest version of iTunes.

An iOS downgrade may lead to lost or unavailable data. Apple doesn’t recommend downgrading, therefore caution should be taken.

Downgrades are possible as long as Apple continues to sign the firmware you'd like to downgrade to. Usually, Apple stops signing earlier versions of iOS about a week or two after a new release.

If you receive an error message 'This device isn’t eligible for the requested build', this could mean that either Apple has stopped signing the iOS firmware, or you’ve downloaded the wrong one.

Here's our step-by-step to do it:

1. Download the older firmware for your device, make sure you download the appropriate version for your iPhone, iPad or iPod

2. Before proceeding, turn off “Find my iPhone” in Settings → iCloud → Find my iPhone

3. Connect your iOS device to your computer

4. Launch iTunes and select your device from the top right corner

5. Create an up-to-date iTunes backup to keep your data safe

   We'd recommend locally to iTunes, as it's quicker both to backup and restore

6. Put your device into DFU mode. To do this, turn off the device, hold the power button for 3 seconds, whilst holding the Home button for 10 seconds. Release the power button and continue holding the home button until iTunes shows the recovery mode confirmation. Click OK.

7. Then click on the 'Restore iPhone' button and select 'Restore and Update' for the confirmation.

8. iTunes will give you some information about the iOS update and will wait for you to click through 'Next' and 'Agree' buttons. iOS will be downloaded and installed to your device.

9. Your device will reboot after completing the installation; a network connection is required to complete the activation

10. 'Slide to upgrade' will appear as your device restarts: unlock, enter the password, activate if necessary, and wait for the install process to finish

That's it! You’ve successfully downgraded.

If you're in need of help restoring an iOS backup from a newer iOS device to an older version of IOS, we have a guide for that here.

Having problems? Don't be a stranger: reach out or leave a comment below!

Find your files

The Files app includes files on the device you're using, as well as those in other cloud services and apps, and iCloud Drive. You can also work with zip files.* To access your files, just open the Files app and choose the location of the file you're looking for.

Save a copy of your file locally

You can find locally stored files in On My [device], under Locations. On your iPad, simply drag files into the On My iPad folder to store them directly on your device. If you want to save a file locally on your iPhone or iPod touch, follow these steps.

1. Go to the file that you want to store on your device.
2. Tap Select > the file name > Organize .
3. Under On My [Device], choose a folder or tap New Folder to create a new one.
   
4. Tap Copy.

You can also long press on a file, choose Move, and select which folder you want to copy it to.

On iOS 12 or earlier, tap the file and choose Move. Then, under On My [device], choose Numbers, Keynote, or Pages, and tap Copy.

Move iCloud Drive files

1. Go to the file that you want to move.
2. Tap Select, then choose the file.
3. Tap Organize .
4. Under On My [Device], choose a folder or tap New Folder to create a new one.
5. Tap Move.

You can also long press on a file, choose Move, and select which folder you want to copy it to.

Look for files on your Mac or PC

• On your Mac, choose Go > iCloud Drive from the menu bar, or click iCloud Drive in the sidebar of a Finder window.
• On iCloud.com, go to the iCloud Drive app.
• On your PC with iCloud for Windows, open File Explorer, then click iCloud Drive.

* Password protected zip folders or directories are not supported in the Files app.

Organize your files

It’s easy to organize all of the files stored in iCloud Drive — including Pages, Numbers, and Keynote documents. When you make changes on one device, your edits are automatically updated on every device using iCloud Drive.

You can make your own folders. Or rename the files and folders you already have when you press firmly on them.

Create new folders

1. Go to Locations.
2. Tap iCloud Drive, On My [device], or the name of a third-party cloud service where you want to keep your new folder.
3. Swipe down on the screen.
4. Tap More .
5. Select New Folder.
6. Enter the name of your new folder. Then tap Done.

On iOS 12 or earlier, tap New Folder . If you don't see New Folder or it's gray, then the third-party cloud service doesn't support new folders.

View your files by name, date, size, or the tags that you add. With colorful and custom labels, you can assign tags to your files any way that you like. That means you'll quickly find just the project or document you need.

How To Install A Dmg File On An Ipad

Add a tag

1. Tap Select.
2. Tap the file that you want to tag.
3. Tap Share > Add Tags .
4. Choose the tag that you want to add.

Rename a tag

1. Go to Locations.
2. Tap More > Edit.
3. Tap the name of an existing tag.
4. Enter the name of your new tag.
5. Tap Done.

Delete files

Select the files that you don't want anymore and tap Delete . If you delete files from the iCloud Drive folder on one device, they delete on your other devices too. iCloud Drive removes the files from every device that you're signed in to with the same Apple ID.

When you delete a file from iCloud Drive or On My [device], it goes into your Recently Deleted folder. If you change your mind or accidentally delete a file, you have 30 days to get it back. Go to Locations > Recently Deleted. Select the file that you want to keep and tap Recover. After 30 days, your files are removed from Recently Deleted.

You can also sign into iCloud.com from your Mac or PC, then go to iCloud Drive and check Recently Deleted.

Share folders and files with your friends or colleagues

Want to share with a friend or colleague? You can share any folder or file stored in iCloud Drive directly from the Files app. In iCloud Drive, tap Select, choose the file or folder that you want to share, tap Share , and select Add People. You can share a folder or file through AirDrop, Messages, Mail, and more. Learn more about how folder sharing and file sharing work in iCloud Drive.

Or maybe you want to collaborate on a project in real time. The Files app lets you do that too with your Pages, Numbers, and Keynote documents. Select the file and tap Share or > Add People . You can invite them to collaborate through Messages, Mail, or copy and paste a link. Your participants are color-coded. And you can see when they're online, actively working on your shared document.

Use third-party apps in Files

The Files app lets you add your third-party cloud services — like Box, Dropbox, OneDrive, Adobe Creative Cloud, Google Drive, and more — so that you can access all of your files on all of your devices. The files you keep in iCloud Drive automatically appear in the Files app, but you need to set up your other cloud services to access them in the Files app too.

Add third-party apps

1. Download and set up the third-party cloud app.
2. Open the Files app.
3. Tap the Browse tab.
4. Tap More > Edit.
5. Turn on the third-party apps that you want to use in the Files app.
6. Tap Done.

If you don't see one of your third-party cloud services in the Files app, check with your cloud provider.

On iOS 12 or earlier, open the Files app then tap Locations > Edit to add third-party apps.

Move third-party cloud files

1. Open the file that you want to move.
2. Tap Share > Copy.
3. Open the folder where you want to move your file.
4. Firmly press the screen.
5. Tap Paste.

Do more with Files on iPadOS

If you're on iPadOS, you can access files on a USB flash drive, SD card, or hard drive through the Files app on iPadOS. Just connect the storage device, and then you can select it under Locations. You can also connect to unencrypted storage on a file server, if that storage is using the APFS, Mac OS Extended, MS-DOS (FAT), or ExFAT format. You also have the option to view your files in Column View, which is helpful if you have files nested in multiple folders. Column View lets you see previews of files and offers access to tools like markup and rotate without even opening a file.

Connect to a file server

1. Open the Browse tab.
2. Tap More .
3. Select Connect to Server.
4. Enter the SMB address.
5. Tap Connect.
6. The server name appears under Shared in the Browse menu.

Switch to Column View

1. In landscape mode, open the Browse tab.
2. Select a folder.
3. Swipe down on the right side of the screen.
4. Select Column View in the upper right.
5. Tap a folder to expand its contents.
6. Tap a file to see a preview.

To leave Column View, tap Grid View or List View , or use your iPad in portrait mode.

If you need help

• Update your iPhone, iPad, or iPod touch to the latest iOS, or iPadOS.
• Set up iCloud on all of your devices and turn on iCloud Drive.
• Make sure that you’re signed in to iCloud with the same Apple ID on all of your devices.
• If you want to upload, download, or share files using cellular data, open Settings, select Cellular, scroll down to iCloud Drive and any third-party cloud services you use, and turn it on for each service.

If you don't want to access your iCloud Drive files in the Files app, you can choose to download and add only third-party cloud services instead.