So I have this 4G+/LTE modem - Huawei E3372, also known as Megafon M150-2 - which is exactly the variation I got.

1. Telenor Usb Modem Driver For Macbook Pro
2. Telenor Usb Modem Driver For Mac Os
3. Telenor Usb Modem Driver For Mac Download
4. Telenor Usb Modem Driver For Mac Pro

3G Device Package is another Telenor internet USB modem 3G mobile WiFi, which also offers a flaming internet speed. For an effective function, you can connect it to your laptop and desktop. Moreover, the 3G network connection is not only a superior and multiple connections, but it also supports up to 21 Mbps speed as well.

Eventually I got sick of its connection management software for Mac OS (the one that comes from Megafon), so I started looking for a way to be able to connect to the internet on Mac OS without it.

The modem itself is rather a great piece of hardware.

Coming in a form-factor of a USB-stick, it is capable of maintaining quite a high-speed internet connection, and apparently it supports all the international LTE standards because I was using it in several countries without problems.

On top of that it has slots for external antennas and even a slot for microSD card (don’t know what to do with it):

Note that it requires full-sized SIM-cards.

I bought it several years ago in Moscow at some Megafon selling point. Back then it cost me just ~700 RUB (10-20 USD?). The reason for such a low price is usually that modems are locked to a particular operator, but in my case surprisingly that wasn’t the case.

Telenor Usb Modem Driver For Macbook Pro

If memory serves me well, I did not perform any unlocking operations, and it just works fine with SIM-cards from other operators than Megafon. I must say, however, I never tried it with any other russian operators - the only SIM-cards I was using it with were the ones from norwegian operators (Telia and Phonero).

And it is available for purchase even today:

• from the very same Megafon, although it is likely to be a locked version (which can be unlocked);
• an unlocked version on Amazon.

But what is wrong with the Megafon software? Well, while it does its job, after some time it started to irritate me for the following reasons:

1. It installs god knows what to your system, while the only thing you really need is just a modem driver;
2. In addition to the main application it requires its service to run in the background, otherwise it won’t even start discovering the modem;
3. It sends some data to different Megafon hosts. I would understand if it was for checking the updates, but why different hosts then? I don’t feel like having yet another spyware in my system;
4. File Activity tool from Instruments shows some enormous files access by the application and/or service. What could be the purpose of such an activity, I wonder?

So I started looking for a way to avoid using the Megafon software.

The first clue was the fact that the modem works just fine with routers:

There is no need to install any Megafon software on the router for it to be able to connect to the internet via the modem, is there? So why the need in such a software on Mac OS?

After some research I got the following steps (mostly from this great topic at 4PDA and also this SuperUser answer):

1. Install the driver for Mac OS for the initial modem discovery;
2. Put the modem into a mode in which it will be discovered by Mac OS as a dial-up modem;
3. Add a new network service using the modem.

Driver for Mac OS

Maybe it’s just me, but I’ve spent quite a some time looking for a driver. Surely, I could use the one installed together with the Megafon software, but there is no way to install only the driver, and I wanted to have a “clean” set-up procedure.

Most of links I found on the internet were dead. Of course I tried looking at the official Huawei’s website, but didn’t succeed there either.

But then in a comment section at some blog I did find a link to the working driver. And it was hosted on the official Huawei’s website! I don’t know how does one find it on his own, but here’s the link.

You don’t have to install everything, the only thing you need from this package is the driver (MobileConnectDriver.pkg):

I will be hosting a copy just in case the official link dies like the rest at some point. Note that this is a driver for Mac OS Mojave, scroll to bottom for the Catalina version.

After the installation you should get the following thing installed:

Check if the modem is discovered in the system:

Switching to dial-up mode

I’m sure that it’s called something else and not the “dial-up mode”, but I haven’t found the correct name for it.

Telenor Usb Modem Driver For Mac Os

So, you’ve got your modem discovered by the system. Connect to it via screen:

And try to communicate with it using AT-commands. First I tried to collect some information about the device (first line in each group is the command, the following lines are the response):

Okay, and here’s the command to switch the modem into dial-up mode:

Connecting to the internet on Mac OS

The only thing left is to create a new network service in Mac OS.

Create a new service using HUAWEIMobile- interface:

Set the good old mobile dial number *99#:

And you’re connected to the internet without any additional software, using only the native Mac OS tools:

As it was pointed out in comments, the driver stopped working on Mac OS Catalina. Most likely this is because it was x32, and Catalina requires x64, so an x64 version of driver is required. That actually was one of the reasons why I haven’t upgraded to Catalina.

Telenor Usb Modem Driver For Mac Download

Fortunatelly, such version exists, and apparently has been available since at least 30.10.2019. An awesome chap shared a link on 4PDA forum. I’ll host a copy here too.

I’ve tested it on Catalina, and it works fine.

Mac OS Big Sur was released today. I installed it in the same virtual machine like the last time to test the modem, and no, it doesn’t work there.

The modem driver should have been still in the system after update, but even so, I’ve installed it again just in case (the one that worked on Catalina). Installation process went fine, didn’t even ask to allow it in Gatekeeper, but when I try to connect, it gives me this error:

And ls -l /dev/tty.HUA* shows that it’s not there.

So yeah, fuck you, Apple, I ain’t updating to Big Sur.

Telenor Usb Modem Driver For Mac Pro

I’ve sent an e-mail to support@huawei.us, but I don’t know if they will even bother to answer, because last time they didn’t. I will be also watching this page just in case.

Note:

1. Please firstly “select location” from the drop-down list and refer to the local ISP and 3G/4G USB modem information;
2. If your country is not in the list, please take “Other Location” option as reference Only.
   Please note, due to firmware upgrading or various parameters changed by some 3G/4G ISPs, there are some 3G/4G modems in the 'Other Location' list that may NOT be compatible with our routers.
3. If your 3G/4G USB modem is listed but not recognized by the router, please refer to the following steps to have a try:
   • Download and upgrade the router with the latest firmware，which is always compatible with more 3G/4G USB modems and available at our website
   • If the problem still remains, please go to 3G/4G Modem Bin File Center to check whether there is a bin file for your 3G/4G USB modem.
   • If your 3G/4G USB modem finally failed to be recognized by the router, please feel free to contact our technical support.
4. If you found a 3G/4G Modem is not listed but compatible with our 3G/4G router, please feel free to tell us, your kindly help is very valuable for other customers.